Poly Foot-braces
|
|
The pedal is molded out of prime Nylon and is easy to adjust from the cockpit.
The track, the adjustment rod, and the mounting clamps are molded out of engineered Polypropylene, and shaped for tremendous strength and uncompromising stiffness. The stainless steel mounting hardware is designed to retrofit most existing foot brace systems - hole spacing is 14-1/2 inches. Easily installed in canoe.
The adjusting mechanism is engineered to be maintenance free, self-cleaning and corrosion resistant.
The track, the adjustment rod, and the mounting clamps are molded out of engineered Polypropylene, and shaped for tremendous strength and uncompromising stiffness. The stainless steel mounting hardware is designed to retrofit most existing foot brace systems - hole spacing is 14-1/2 inches. Easily installed in canoe.
The adjusting mechanism is engineered to be maintenance free, self-cleaning and corrosion resistant.
|
|
|
Glue on stud
These studs come with our foot braces when the glue-on option is chosen, but we can see lots of other possible applications. A bit of fiberglass cloth and epoxy will attach these studs to any surface that will take glue.
Now we are offering Fiberglass patches for epoxying these studs down, in case you don't have any around. They are cut from 6oz, 4 inch wide tape.
Now we are offering Fiberglass patches for epoxying these studs down, in case you don't have any around. They are cut from 6oz, 4 inch wide tape.
